SNMP Configuration. In ONU remote management mode. ZXAN(gpon-onu-mng)#mvlan 200 ZXAN. Speedy, VPN IP Dan Voip Pada GPON ZTE ONT Type F820. 'We have chosen ZTE for additional 3G 900/2100 rollout and for LTE mobile. Unified network management for all ZTE NGN products. SNMP (V1, V2C, V3. ZTE NetNumen N31 NMS. Unified network management for all ZTE NGN products including soft switch series. SNMP (V1, V2C, V3).

• Snmp Management

Figure: Open Access Network Structure ( FTTx) • • • • • • • • • • • • • • • • • • • • *** Concept about GPON Quad Play**** Accessing Internet is going to be a fundamental right like other basic human rights. No matter how often a user uses Internet, waiting for a web page to load is really an annoyance. To overcome this situation, Internet speed has increased significantly in the past decade to keep pace with the demand of users, new services and bandwidth-hungry applications.

End with CTRL/Z. ZXAN(config)#snmp-server community public view allview ro ZXAN(config)#snmp-server enable trap ZXAN(config)#snmp-server host 10.62.31.123 trap version 2c pulic enable NOTIFICATIONS server-index 1 ZXAN(config)#show snmp config snmp-server location xxxx, yyy, Bangaldesh. Snmp-server contact +88-017-xxxxxxxx snmp-server packetSize 3000 snmp-server engine-id 0001 snmp-server community public view allview rw snmp-server view allview internet included snmp-server view DefaultView system included snmp-server host 10.62.31.123 trap version 2c pulic enable NOTIFICATIONS server-index 1 udp-port 162 snmp-server enable trap SNMP snmp-server enable trap VPN snmp-server enable trap BGP snmp-server enable trap OSPF snmp-server enable trap RMON snmp-server enable trap STALAR.

ZTE) MIBs include ZXR10-SMI.

ZXAN(config)# snmp-server host 10.63.10.105 trap version 2c private enable NOTIFICATIONS server-index 1 udp-port 162 Note: When there is trap server from other vendors besides ZTE NetNumen NMS, multiple snmp-server hosts can be configured. Step-6: Configure Trap types (optional). ZXA10 C220 supports six types of traps: SNMP, BGP, OSPF, RMON, STALARM, VPN. All traps are enabled by default. ZXAN(config)# snmp-server enable trap ZXAN(config)# exit ZXAN# Step-7: Save configuration data. ZXAN# write Building configuration [OK] Result: The ZXA10 C220 can be managed through the in–band NM IP address. Configuring Out-of-Band NM: Prerequisites: • Make sure network device works normally.

B.Run the port portid ont-auto-find command to enable the auto-find function of the ONT. After the function is enabled, you can add an ONT according to the information reported by the system. By default, the ONT auto-find function of a GPON port is disabled. NOTE: An auto-find ONT is in the auto-find state. The auto-find ONT can work in the normal state only after it is confirmed or added. C.Run the ont add command to add an ONT offline, or run the ont confirm command to confirm the auto-find ONT.

These demands include as multimedia content based e-commerce, video on demand, high definition TV, IPTV, online gaming, social media, etc. Lots of different technologies like gigabit Ethernet, mobile Internet, etc, that have been trying to cater and satisfy the user demand. Gigabit passive optical networks (GPON) is one of the high-speed access technology which offers triple play service (i. E., data, voice and video) GPON is easier, faster and low cost. GPON can transport Ethernet, ATM and TDM (PSTN, ISDN, E1 and E3) traffic. It has been widely accepted by Internet service providers and operators in terms of bandwidth upgrade, service bearer as well as passive network maintenance.

Setting the level too high for extended periods can bog down the system resources and interrupt services. Hostname S511_OLT clock timezone australia 7 logging file enable logging level svcm 3 ONU Profiles ONU Profiles can be created which allows the administrator to rate limit each customer based on the 'plan' they have subscribed to. A default profile can also be set which rate-limits any customers that have not had a plan designated. The examples below give 2 examples as a reference: HIGH profile - 20Mbps downlink, 2Mbps uplink LOW profile- 10Mbps downlink, 1Mbps uplink • The LOW profile is set as the default in the examples below, meaning any customers not specified to be allocated the HIGH profile will automatically be allocated the LOW profile. • If there is no profile set as default, then ONUs will not be rate-limited unless they have a profile specified. • All packets sizes shown below must be set in 64kbyte increments, else will automatically adjust down to the nearest 64kbyte value GEPON Syntax: epon-llid-profile delay Example: epon-llid-profile HIGH link-index all up-bw 1 2 2 delay tolerant down-bw 1 20 2 delay tolerant token 4 epon-llid-profile LOW default enable link-index all up-bw 1 1 1 delay tolerant down-bw 1 10 2 delay tolerant token 4 GPON It is possible in GPON to rate limit based on CoS however for simplicity, this example rate limits all data.

All operation can be done via topology view. • Powerful fault analysis Provides fault correlation analysis, such as alarm delay, alarm count, alarm restraint, alarm merger. • Reliability Supports out-of-band and in-band management modes and provides hot-backup. • Security Provides privileged access control and log records. Protocols • Southbound Protocols: SNMP (V1, V2C, V3): standards of various products and private MIB; TELNET and MML TR069 • Northbound Protocols: TL1 Syslog CORBA SNMP XML MML Capability • 256 users can be registered. 100 concurrent users can access the NM server simultaneously.

• Log in to the ZXA10 C220 through HyperTerminal/Xshell/Putty. Background Information: • In the out-of-band NM mode, NMS information is transmitted through non-service channel.

This particular page contains a full list of all SNMP MIBS from Zhongxing Telecom Co.,ltd. ZTE) represented in our database. Use these MIBs to manage and capture information from various Zhongxing Telecom Co.,ltd. ZTE) equipment, including Zhongxing Telecom Co.,ltd. ZTE) routers, switches, other devices and software agents.

ZTE GPON SNMP management IKARUS SNMP management system called Ikarus provides graphical interface between administrator and managed GPON network. Ikarus is developed by OFA company for management and maintance of ZTE GPON networks. The key feature of this system is simplicity. Ikarus focus on quick registration of new ONTs and easy configuration maintance of GPON network. All new registered ONU are automatically added to monitoring and diagnose systems.

This example helps avoid direct access to the ACS and management machine from the Internet. Access can still be gained by setting up a VPN connection on the network. OLT Configuration The OLT configuration script/file can be broken down into several main sections: • General Configuration • System Settings • Port and RG Configuration Settings • Basic VLAN settings and dot1Q tagging • Management Port Settings • VLAN Settings • IGMP Settings • VTY Settings • DHCP Pool Settings Commands may differ slightly between GEPON and GPON OLTs. Where the config for each example is significantly different, examples of both are shown.

How to Configuring a GPON ONT (Distributed Mode) The MA5600T/MA5603T/MA5608T provides end users with services through the ONT. The MA5600T/MA5603T/MA5608T can manage the ONT and the ONT can work in the normal state only after the channel between the MA5600T/MA5603T/MA5608T and the ONT is available. Prerequisites The GPON ONT profile is already created. Configuring a GPON ONT Capability Profile and Configuring a GPON ONT Alarm Profile are already completed. Context The MA5600T/MA5603T/MA5608T uses the ONT Management and Control Interface (OMCI) protocol to manage and configure the GPON ONT, and supports the offline configuration of the ONT. The ONT does not need to save the configuration information locally. This helps to provision services.

Protocols Southbound Protocols: • SNMP (V1, V2C, V3): standards of various products and private MIB; • TELNET and MML • TR069 Northbound Protocols: • TL1 • Syslog • CORBA • SNMP • XML • MML Capability 256 users can be registered. 100 concurrent users can access the NM server simultaneously. Availability Single server:MTTR 70m MTBF 259200m AVAILABLITY 99.997% Redundant servers:MTTR 8.5m MTBF 259200m AVAILABLITY 99.9997% Position NetnumenTM N31 is located in a centralized way.

• Availability Single server：MTTR 70m MTBF 259200m AVAILABLITY 99.997% Redundant servers：MTTR 8.5m MTBF 259200m AVAILABLITY 99.9997% Position NetnumenTM N31 is located in a centralized way.

ZXAN(config)# interface vlan 1000 ZXAN(config-if)# ii. Configure IP address of in-band NM interface. ZXAN(config-if)# ip address 10.67.1.10 255.255.255.0 ZXAN(config-if)# exit ZXAN(config)# Note: In-band NM IP address and out-of-band NM IP address must not be in the same network segment. Step-3: Configure in-band NM route. ZXAN(config)# ip route 10.63.10.0 255.255.255.0 10.67.1.254 Step-4: Configure SNMP community. There is a default public community in the system.

Snmp Management

• Multiple types of OS and DB It supports multiple operation system such as windows and UNIX. Bass pro xps battery charger manual. It can run on multiple DBMS, such as SQL server.

The ZXA10 C220 supports six types of traps: SNMP, BGP, OSPF, RMON, STALARM, and VPN. Step-5: Use the snmp-server host command to configure SNMP server (trap destination host). Step-6: Use the show snmp config command to query SNMP configuration.: Configure SNMP server: • Community: Public • Right: Read only • SNMP server host: 10.62.31.123 • SNMP version: v2 ZXAN#configure terminal Enter configuration, one per line.

ZXAN(config)# ii. Enter uplink interface configuration mode. ZXAN(config)# interface gei_0/14/1 ZXAN(config-if)# iii. Add uplink port to NM VLAN in tag mode. ZXAN(config-if)# switchport vlan 1000 tag ZXAN(config-if)# exit ZXAN(config)# Note: When a port is added to a VLAN, the VLAN is added automatically. Step-2: Configure IP address of in-band NM interface. Enter VLAN interface configuration mode.

Network Diagram Sample: Bellow are the in-band NM networking diagram. ZTE ZXA10 C220 OLT NM Configuration Configuration Data: ZXA10 C220 in-band NM interface • VLAN ID: 1000 • Port: 0/14/1 • IP address: 10.67.1.10/24 interface • IP address: 10.67.1.254/24 SNMP server host • IP address; 10.63.10.105/24 • Version: V2C • Community: private •: NOTIFICATIONS The corresponding data must be configured on the router as well. To configure the in-band NM, perform the following steps: Step-1: Configure in-band NM VLAN. Enter global configuration mode. ZXAN# configure terminal Enter configuration commands, one per line. End with CTRL/Z.

Integrated Network Management System NetNumen N31 The integrated network management system provides centralized, unified network management for all ZTE NGN products including soft switch series, ZXA10 MSAN/MSAG, ZXA10 PON, ZXDSL series, terminal series, ZXR10/ZXB10/ZXE10 series、ZXWMN HLR and so on. It also provides customers with a unified management interface to other equipment vendors’ products. Functionality • Topology and view management • Fault management • performance management • Configuration Management • Report management • Policy management • Version management • Diagnose test management • Log management • Security management • MIB management Characteristics • Unified platform Operating, maintaining and managing various NEs on an Unified platform in a centralized way. • Expandable platform Based on J2EE, it is an expandable platform to add more new NE management and new functions. • Multiple types of OS and DB It supports multiple operation system such as windows and UNIX. It can run on multiple DBMS, such as SQL server. • Powerful topology management It provides the graphical diagram of the whole network, including all the nodes and links.

In this scheme, a wavelength multiplexer is used instead of Erbium doped fiber amplifier combiner with a fixed wavelength, which increases the performance substantially. It is found that using 1550 nm wavelength, the proposed design provides multiple services with high performance to the end user.

If they are different, the OLT obtains the ONT password and compares it with the last 10 bytes of the LOID. If they are the same, the ONT authentication is also passed. This operation is for compatibility with the ONTs using password authentication. Adding ONTs in offline mode is applicable to the batch deployment scenario. All ONTs are added to the OLT to complete service provisioning beforehand. When a use subscribes to the service, an installation engineer takes an ONT to the user's house and completes configurations. After the ONT goes online and passes authentication (generally the password authentication mode or LOID authentication mode is used), the service is provisioned.